Best led strip light connectors

Share this Article

LED strip light connectors offer a quick-connect option that eliminates the need for a soldering iron. While soldering is quite dependable, it can take a long time to make several different connections. As a result, LED strip light solder less connectors are ideal for making several connections quickly.

In this article, we will explore the 30 best-led strip light connectors for you with the pros and cons of every led strip light connector with other information on the connectors you are looking for!

Best led strip light connectors

When choosing LED strip connections, there are several variables to consider, such as connecting LED strips to strips, strips to controllers, ribbons to the wire, strips to power adapters or power supplies, and so on. Colour-changing LED strip lights use a four-pin RGB LED strip connector, whereas monochromatic white and coloured LED light strips use a two-pin LED connector.

  • 2 (Two) pin LED connector:For neutral white, warm white, cool white, single colour, red, green, and blue lights.
  • 3 (Three) pin LED connector-For tunable white light.
  • 4 (Four) pin LED connector-For RGB colour changing LED strip light.
  • 5 (Five) pin LED connector-for RGBW LED strip light.

Two-pin LED strip light connectors

Two-pin LED strip light connectors are neutral white, warm white, cool white, single colour, red, green, and blue lights. Here are the five best two-pin LED light strip connectors. 

2 Conductor LED Strip Connector

Our rating: 9/10

led strip light connectors

Pros:

√ Modern style

√ Durable and powerful

√ Consistent with both waterproof and non-waterproof light strips

Cons:

× Quite expensive

× Not contain wires or strip lights.

Key points

►This connector is for a 10mm wide SMD5050 5630 single colour LED strip.

►It can withstand up to 4A current and 0-24V voltage, and it has a heat resistance range of -20 to 100 degrees Celsius.

►One end has a stripping clip, while the other has wires as a lead. Quick snap-down without soldering.

►Both waterproof and non-waterproof light strips are compatible. When installing waterproof strips, remove the silicon from the surface around the soldering line region.

2 Pin 8mm LED Strip Connector Unwired Clips

Our rating: 9/10

led strip light connectors

Pros:

√ Modern style

√ Durable and powerful

√ Quick and flexible connection

√ No need to solder

√ Consistent with both waterproof and non-waterproof light strips

Cons:

× Not dimmable.

× It is difficult to open again after closing.

× It does not contain wires or strip lights.

Key points

►This led strip connector is appropriate for 8mm width SMD 3528 2835 3014 5630 single colours LED light strips.

►This connector has one end connected with a 2-conductor flat extension wire and another connected with the led strip at the other.

►These led strip connections are not compatible with 10mm or RGB led strips.

►It can handle up to 6A of current.

►It allows you to connect longer LED strips with just one LED connection.

►It is compatible with 5v, 12v, and 24v LED strips.

►If you wish to attach a waterproof LED strip light, you need to peel off the coated silicon on the surface around the soldering line region.

2 Pin 8mm LED Strip light Connector

Our rating: 7/10

led strip light connectors

Pros:

√ Modern style

√ Durable and powerful

√ Compatible with both waterproof and non-waterproof LED light strips

√ 30 days money-back guarantee 

Cons:

× Problematic wire end 

× Not dimmable

× Not contain wires or strip lights.

Key points

►This connector is for single colour LED light strips with an 8mm SMD 3528 2835 3014 5630 connector. 

►It can handle up to 5A of power, allowing you to use a single connector to extend longer and safer continuous LED strip illumination.

►Its one end is connected with a 2-conductor flat extension wire and connects with a led strip to the other end. 

►If you wish to connect with the WATERPROOF LED strip light, you need to peel off the coated silicon on the surface around the soldering line region. 

►Without stripping, these connection led strip connectors can penetrate 2 pin 8 mm PCB boards and 20 gauge wire. 5v, 12v, and 24v led tape are all compatible with this. 

►10mm led strips, RGB led strips, and non-standard 22awg wire are not compatible with these led strip connections. 

L-Shaped Solderless Snap-Down 2 Conductor LED Strip Connector

Our rating: 8/10

led strip light connectors

Pros:

√ Perfect for corners

√ Durable and powerful

√ Soldering is significantly easier

√ Consistent with both waterproof and non-waterproof light strips

√ Money-back guarantee with an excellent return policy

Cons:

× The contact pads are too long

× Not contain wires or strip lights

Key points

►This connector is for SMD3528 2835 single colour LED strips that are 8mm wide.

►It is not appropriate for 120LEDs/M strips with high intensity.

►Solderless fast snap-down L shape for corner or rotating connection.

►It can stand up to 4A current and 0-24V voltage, and it has a heat resistance range of -20 to 100 degrees Celsius.

►Both waterproof and non-waterproof light strips are compatible. When installing waterproof strips, remove the silicon from the surface around the soldering line region.

FSJEE 2Pin 8mm LED Strip Connector 

Our rating: 8/10

Pros: 

√ Quick and easy installation

√ Time-saving, smoothly, and easy

√ No soldering

√ Consistent with both waterproof and non-waterproof light strips

Cons: 

× Not dimmable

× Not contain wires or strip lights

Key points

►It’s just for single colour 8mm SMD 2835 3528 strip lights.

►Installation is quick and straightforward, with no soldering or rewiring required.

►You can prevent twisting and perhaps harming your LED strip by using the L shapes. Solderless rapid snap-down L-shape for corner or rotating connection.

►Both waterproof and non-waterproof light strips are compatible with this connector. When installing waterproof strips, remove the silicon from the surface around the soldering line region.


Three-pin LED light strip connectors

Three-pin LED connectors for tunable white light. Here are the five best three-pin LED strip light connectors.

ACTOR JST SM 3 Pin LED Connector

Our rating: 9/10

Pros:

√ The wire is pre-stripped and pre-tinned

√ Tinned copper wire

√ No soldering

√ Easy return policy

Cons:

× Connectors may be missing in the package

Key points

►This connector is made of plastic material, and it is easy to peel off.

►This three-pin connector is suitable for LED strips, LED wall washers, LED belt lights, LED underground lights, curtain lights, twinkle lights, and other similar devices.

►It is compatible with the SMD 3528 5050 RGB LED Strip, commonly used in LED strips, tiny remote control helicopters, indoor 3D planes, and other applications.

►This connector is waterproof, dust-proof, lightweight, and has an attractive look.

JST SM 3 Pin Connectors for LED Strip

Our rating: 9/10

led strip light connectors

Pros:

√ Easy to use

√ No need soldering

√ Tinned copper inside

Cons:

× Not good for high-density power lighting.

× It can’t handle 12V 15A.

Key points

►3PIN JST SM connector is for WS2811 WS2812B LED strips, LED underground light, LED wall washers, LED belt light, twinkle light, curtain light, and so on.

►It is suitable for water, dust, high sensing performance requirements.

►The plug connection is reliable, safe, lightweight, and beautiful in appearance.

Nice lux CCT Tunable 3 Pin LED Strip Connector

Our rating: 9/10

Pros:

√ Easy to connect

√ No stripping needed

√ No soldering needed

√ Powerful current support, up to 5A

Cons:

× Hard to use for an average person

Key points

►You can DIY both strip-to-power-lead connector wire that is up to 3 meter long and strip-to-strip-bridge.

►Powerful connector with as much as a total of 5A of supported current, which allows you to connect longer LED strips with a single connector, minimizing cost and connection labor.

►Stripping light is accessible with 3M VHB red foam sticky tape.

►It is suitable for non-waterproof dimmable (cct) SMD3528/3014/2835/2016 strip lights with LED densities ranging from 30120 LEDs per meter.

HKBAYI 3 pin JST SM LED Connector

Our rating: 7/10

Pros:

√ Easy to connect

√ No soldering needed

Cons:

× Thin wires

× Not appropriate for longer LED strips

Key points

►This 3PIN LED connector is for LED strips, LED underground light, LED wall-washers, curtain light, LED belt light, twinkle light and so on.

►It is ideal for water, dust, high sensing performance electrical system demands, the customized HID xenon light and dust-proof, waterproof, high pressure.

►Two on the plug connection is stable and secure, with no loose ends, and a lightweight and attractive appearance.

Alighting’s LED Connector 3 Pin for 10mm

Our rating: 7/10

led strip light connectors

Pros:

√ Can DIY custom wiring

√ No soldering needed.

Cons:

× Only conductive connection

× Too soft or too thin

Key points

►This is a safe and rapid wire connector that does not require peeling, tapping, or twisting. It has a good waterproof and dustproof features.

►3 pin 10mm 5050 STANDARD WATERPROOF LED strip lamp compatible. One end is for a three-core extension wire, while the other is for a dual-color waterproof strip light.

►It is a solid and much stronger connection. Firmly bite through the strip, unlike standard connectors that merely have a conductive connection.


Four pins LED strip light connectors

Four-pin LED strip light connectors are suitable for RGB colour changing LED strip lights. Here are the five best four-pin LED strip light connectors.

4-Pin RGB LED Light Strip Connectors

Our rating: 9/10

led strip light connectors

Pros:

√ Solder less couplers

√ Designed especially for waterproof strips

√12 months return policy with 12 month guarantee.

Cons:

× Hard to open

× Quite expensive compare to other

Key points

►It works with 0.39inch /10mm wide SMD 5050 RGB Flexible LED Strip lights.

►It contains a solder less quick snap down solution and a quick splitter connection.

►These are made specifically for use with silicone-coated waterproof strips.

►The Company provides a 12-month return policy as well as a one-year warranty. You can purchase this with confidence!

L Shape 4-Pin LED Connectors

Our rating: 9/10

Pros:

√ No soldering needed

√ Perfect for 90º corner connection

√ 2 extra couplers are included.

Cons:

× Quite large connectors

Key points

►This connector set includes detachable L sheets and straight couplers, making it ideal for connecting 90-degree corners and extending along a straight line.

►It works with any 4-pin 10mm (0.39in) wide SMD 3528/5050 which may be multicolor LED flexible strip light.

►Without the difficulties of soldering, you can make a quick shunt and firm connection.

►Simply slip the light strip between the connector’s pins and secure it with the clip.

►Whatever order the RGB is in, the connection works as long as the light strips on both sides are aligned.

Nexillumi L Shape 4-pin Connectors

Our rating: 9/10

Pros:

√ No soldering needed

√ Tight connections

√ Fireproof material

√ Cable length can be customized

√ 30 day refund policy

√ 1 year warranty

Cons:

× Don’t clamp hard enough

Key points

►4-pin 10mm 5050/3528 RGB LED strip lights and 2835/3528 4-pin 10mm LED Strips are compatible with this.

►It’s in the shape of L at a 90-degree angle, with adjustable corners that can be bent straight without breaking, reinforced cords, and adjustable length.

►It works with 4-pin 10mm LED strips that are waterproof to IP65 and non-waterproof to IP20.

►If you want the LED strips to have stable connections, you can remove some of the back-adhesive.

JACKYLED 4-Pin LED Light Strip Connectors

Our rating: 9/10

Pros:

√ No soldering needed

√ Wires are thicker

√ Flexible and enough durable

√ Connector is fully bendable

Cons:

× Difficult to install

Key points

►It works with all 4 pins of 5050 RGB LED Strip and 3528 LED Light Strip; waterproof and non-waterproof light strips; dimmable strip lights.

►Each circuit in this 4 pin led connection has 17 strands of tin-plated oxygen-free copper.

►The wires are thicker than any other RGB led strip jumpers on the market, and the physical features are more robust.

►These connectors for led light strips are flexible and sturdy enough to bend or twist in any direction without breaking.

DR.LILIANG 4-Pin RGB LED Light Strip Connectors

Our rating: 9/10

Pros:

√ No soldering needed

√ Durable premium PVC plastic cover

√ Wire is soft and fully bendable.

Cons:

× The crimping is not tight enough

× Little expensive

Key points

►It works with any 4-pin 10mm (0.39in) wide 5050 RGB multicolour LED lights strip, whether waterproof or non-waterproof.

►This led connector kit can be used to connect the led strip to the strip, the controller to the strip, and the splitter to the strip.

►It accepts a current of 0-4A and a voltage of 0-24V, with a temperature range of -40°F to 221°F.

►The wire is soft and bendable, allowing you to bend the wires to any shape you wish while keeping the current stable.


Five-pin LED strip light connectors

5 (five) pin LED connectors are only for RGBW LED strip lights. Here are the five best five-pin LED strip light connectors.

5 Pin 10mm LED Strip to Wire Connector

Our rating: 9/10

Pros:

√ No soldering needed

√ It fits perfectly

√ Allowed to extend the lights

√ High quality tin plated copper core

√PVC plastic wire cover

Cons:

× It cannot work with 8mm led strips, 20 AWG wire or 3528 RGB led strips.

Key points

►The led strip connector works with IP20/IP65 10mm width 5050 RGBW 5 Soldering Pads tape light and is compatible with 5v, 12v, and 24v led light strips.

►The 5pin LED light connectors from alighting’s are compatible with 10mm RGBW LED strip lights.

►It can be used with solid wire, multi-core wire, and 22 AWG 5 conductor wire.

►The wire is easier to pierce with the clear terminal, and the one-time success rate is higher.

►Fits all 5050 RGBW LED strips with a width of 10mm. perfect for a NON-WATERPROOF LED Tape Light DIY project or an IP65 WATERPROOF LED Tape Light DIY project.

►The waterproof strips do not require the removal of the silicone cover.

SUPERNIGHT 5PIN LED Strip Connector Kit

Our rating: 9/10

Pros:

√ Easy to connect

√ No soldering needed

√ Contains different types of connectors

√ Fire-proof material

√Anti-corrosive

√ 1-year warranty

√ 30 days money-back guarantee

Cons:

× The plastic body is quite fragile.

Key points

►10mm SMD 5050 RGBW RGBWW led strip lights are compatible with 5PIN LED Strip Connector Kits.

►Both waterproof and non-waterproof tape lights are compatible with it.

►For waterproof lights, remove the silicon from the surface around the soldering area.

►Several led light strips can be joined with connectors by hand; free DIY strip to strip or strip to controller connection extension.

►Connectors are made of fire-resistant, high-temperature-resistant material.

►The cable insulation is made of high-quality PVC, which is anti-corrosive; and tin-plated pure copper wires inside the cable can be anti-oxidation.

SUPERNIGHT RGBW LED Strip Light 5 Pin Connector

Our rating: 9/10

Pros:

√ Easy to connect

√ No soldering needed

√ Cross configuration connector

Cons:

× Can’t turn left

Key points

►It is an “L” shape connector which is for 5050 3528 strip light

►It is compatible only for 5 pins RGBW LED strip lights

►It is only for Non-waterproof strips, if the strip is waterproof, you have to remove the cover.

►The L-shaped connector creates a precise 90-degree curve between two strip lights, making it excellent for DIY projects such as decorating rectangles, squares, and corner portions.

LED Light Strip Connector for RGBW 5 Pins

Our rating: 9/10

Pros:

√ Easy to install

√ No soldering needed

√ Flexible and durable wire

Cons:

× Cannot stick hard

Key points

►Solderless 10 mm RGBW LED light strip connectors to mount with a simple clasp attachment, allowing for a safe and secure connection without the use of any tools.

►If you want to use for waterproof RGBW / RGBWW led strip you have to cut up the waterproof Glue layer.

►You may flexibly twist and extend this flexible and robust wire.

LitaElek 5 pin RGBW LED Strip Connector

Our rating: 8/10

Pros:

√ No soldering needed

√ Easy to connect

Cons:

× Sometimes loose connection may happen

Key points

► Only suitable for 10mm wide SMD 5050 RGBW LED strip lights.

► Works with both Waterproof and Non-Waterproof 10mm wide SMD 5050 RGBW LED strip lights.

Please follow and like us:

2 thoughts on “Best led strip light connectors”

Leave a Comment