How to fix led light remote colors?

Share this Article

Did you install new LED lights, and they’re giving off the wrong color? And how to fix the led light remote colors? This is a common problem that many people encounter. That’s why we want to discuss how to fix it quickly, so your house or garden doesn’t look like something out of an old TV show!

How to fix led light remote colors

LEDs (light-emitting diodes) are energy-efficient, but what happens when installation isn’t perfect, namely, when you’re not getting enough white light from them due to their warm tones instead?

Luckily for all those frustrated homeowners around town looking into fixing this issue: there’ve been some developments in this regard. How does one resolve the led light remote colors? We’re going to briefly discuss the different ways to go about this.

What is an LED strip light?

LEDs are a more efficient and cost-effective way to produce light. They also have many additional features that traditional bulbs don’t offer, such as long life, low power consumption, etcetera! LEDs will cut down on your electricity bills while adding new cool things for you in the process, like color-changing capabilities or even animations when turned off then back on again!

Many people may not be aware, but LED stands for ‘light-emitting diode.’ These little guys use far less wattage than incandescent lights–saving energy both now and in the future!

How do I fix LED light remote colors when it’s not displaying the correct color? How many ways are there to go about this? Let’s see – we’ve got some different options, so let’s go over them.

How to fix led remote light colors?

At first, you should follow these steps to fix your led light remote colors. Here are the steps are-

Step 1: Double-check that all of the LED strip kit’s components are correctly connected and powered.

Step 2: Turn off the computer (press the right top red button)

Step 3: Press and hold the “FADE7” button for one second.

Step 4: Restart the LED strips and press the Red, Green, and Blue buttons one by one until they return to their original color.

If this is not the case, repeat Steps 1 through 4 until the color changes to the correct one.

Please keep the remote controller aimed at the RGB control box (the white part) during each step.

How to fix led remote light colors?

If it does not work by following the above steps, you can check thoroughly for the deep solution.

1. Check that everything is plugged correctly 

One of the reasons for the color problem with LED lights is that they may not have been plugged in properly. Luckily it’s a relatively easy problem to fix- all you need do is make sure that the black wire on the RGB strip connector matches up with the +12V side and matches colors correctly (R+G+B). Next, make sure cables are correctly connected along with R-, G-, B-. Then connect it to the power source that will be used to power your lights.

2. Try adjusting intensity levels

When you first turn them on, it could be that the lights are too dim. To check this, try adjusting their level of brightness using the app controller. This way, you can increase their intensity until they’re much brighter and begin showing colors correctly.

3. Consider the color temperature of your lights

Color temperature is a big deal for LED strip lighting, especially if you’re looking for warm white tones instead of cool ones. The warmer the color temperature gets, the more yellowish or golden it will start to look – due to an enormous amount of red being displayed compared to blue and green!

If your strip looks right what you want after installation but is just not as bright as expected: try using a dimmable power supply instead of a non-dimmable type! Plus, play around with the brightness levels on your controller, too – just a little tweaking may be all that is needed.

4. Check your settings and do a reset

If you’ve just installed LED lights in your home or garden and they’re giving off the wrong color, there’s a straightforward solution: check your settings! If you haven’t messed with any of the buttons on the remote control and everything is set up correctly, you should be fine.

Just double-check that you didn’t accidentally turn down one of the dimmer knobs before turning anywhere else. The first option is to reset the controller. Once you’ve double-checked that your settings are fine, you should be all set!

5. Buy another controller or a new strip of lights

If you’re having problems with your current controller, it might just be time to buy a new one. You have two options: buy a new controller or a new strip of lights. Alternatively, if you’re searching for something a little more different and high-tech, you might want to take a look at some of the new lighting brands!

This will give you an idea of the various LED lighting options available to you. If none of these solutions work, either your controller is broken, or the strip has gone wrong. It depends on what type of RGB strip you have and what level of failure has occurred–whether that be a loose wire, a burned-out circuit board, or something else entirely.

Please follow and like us:

Leave a Comment