How to fix LED lights that are different colors?

Share this Article

How to fix LED lights that are different colors? Before we knew about this, we should have known something about LED strip lights! Many people on Reedit have expressed dissatisfaction with the color of their new LED strip light. The main reason for this is that each part is sourced from a different supplier. As a result, they may use LEDs of varying brightness and colors.

How to fix LED lights that are different colors
How to fix LED lights that are different colors

As a result, avoid unknown companies because paying money for something you don’t like or can’t utilize makes no sense. Govee is a good option if you’re searching for a low-cost, long-lasting strip light.

To summarize, LEDs are an essential component of any house lighting system. Even if they are energy-efficient and long-lasting, they can nevertheless cause problems. Overheating, power drop, poor ventilation, or substandard parts can cause color shifts.

LED strip lights

LED lights are the most up-to-date type of light bulb. They consume less energy and last significantly longer than normal incandescent bulbs, with an average lifespan of roughly 20 years. LED bulbs are available in various colors, including green, red, blue, white, and multicolor combinations that can be mixed to make any color.

The main issue with this type of lighting is that if you buy it from a store where all LEDs are mass-produced on a single production line. Because there are no standards for each manufacturer’s product lines, you may end up with ones that don’t match your room’s decor because there aren’t as many as there used to be. Today, we’ll go through some of the methods to fix LED lights that are different colors. But before that, we will try to identify the causes of this problem!

Why Are the LED Strips Changing Colors?

There may have many issues with LED lights in different colors. Those are-

Voltage drop

When you use LED strip lights, the wires are two copper ribbons that go the whole length of the strip. The color of your strips will change as you move away from the power source. This is because there is a voltage drop.

Think about an electric circuit. There are positive and negative wires. The current moves from one wire to another until it reaches the other.

If you want to use a lot of cheap LED strips, they don’t work that way at all. Copper is a metal that is used to make electricity. Cheap LED strips have less copper than their more expensive counterparts. Thus, the less copper there is, the more resistance there is, which means that the voltage drop will be higher because of this.

Overheating

How to fix LED lights that are different colors

If LED strips become too hot, they can change color; reputable manufactures incorporate adequate heat dissipation features into their adhesive.

Their adhesive contains ceramic particles that enable heat to be wicked away from the strip and dispersed away from sensitive diodes. Following that are aluminum casings or channels that act as heat sink for the LEDs on the strip. However, if LEDs are subjected to excessive heat, they can overheat.

LED strips are ideal for illuminating dark areas due to a lack of natural light. Put your LED strip on a surface that will not overheat if you want it to last a long time and perform well.

If possible, place the LED lights on metallic surfaces rather than wood to maximize heat transfer. Because woods retain more heat, prolonged exposure to high temperatures can affect premature aging.

Paint in circuits

One of the less well-known but all-too-common causes of LED failure is that you have mistakenly painted over them! People can color their LED strip light sets around the house or office after placing them.

Even a drop of paint on the diode will cause it to generate light that appears dim, faded or even a different color. Keep your strips protected when painting and clear any old paint off of them with paint removers to maintain full illumination.

One of the worst consequences of painting your strip light is that some paint may end up in the circuitry or wiring. In this situation, the strip could be fully shorted or damaged, causing it to flicker, change colors unexpectedly, or stop working.

Not enough air ventilation

How to fix LED lights that are different colors

Poor air ventilation is one of the most serious threats to LED strip lights. These diodes can change color and deteriorate if they become overheated. This happens when there isn’t enough space for warm air to travel away from the lighting setup and cooler air to circulate. As a result, place them where they will receive adequate ventilation.

Related Articles
Led strip lights idea for your home: 7 best ideas

How to fix LED lights that are different colors?

One of the aspects that indeed draws people into utilizing LEDs instead of traditional lighting is the ability to choose from a broad spectrum of colors to light your areas as you see fit.

This enables mood lighting or the use of various hues in the same place. It can feel like Christmas every day of the year if you truly desire it!

Unfortunately, like with any piece of technology, the more features there are, the more likely something will go wrong now and then.

As a result, several of you have noticed that this specific function appears to be letting the entire system down. The most prevalent complaint is that the wrong colors are displayed at the wrong time.

Regrettably, there are various potential causes of this issue. As a result, we can’t pin it down to a single reason.

What we can do, though, is run through a series of remedies that should return everything to normal, regardless of the cause. Fixing it is as easy as following these steps:

By Checking that everything is plugged in correctly

In the first place, make sure that everything is plugged in the right way. The most typical explanation for this is that your LED lights were not correctly plugged in. Fortunately for us, this is a relatively straightforward problem to resolve.

a) To start, make sure that the black wire on your RGB strip connector is on the same side as the +12V.

b) It’s time for step number two. Check to make sure that the + end of your connector lines up with the positive side of your strip.

c) In this case, make sure that your R, G, and B wires are connected correctly while you do this.

People have said that their wires have been mislabeled at some point. You can’t do anything but mess around with the wires until you find a combination that makes everything work as it should again.

By Resetting the LED Lights

The preceding step should have worked for most of you, but if not, here’s the following item to cross off your list.

Though this repair may appear to be far too basic to be effective, you would be astonished at the power of a simple reset.

Indeed, this patch works so frequently and on so many devices that IT pros often joke that they would be out of work if users only followed this procedure before contacting support.

Thus, all required for this fix is resetting the lights and the controller. This restores everything to its factory default settings.

Over time, modifications to your settings may occur, resulting in your lights malfunctioning. Resetting the computer is the most straightforward approach to undo such changes and remove any flaws that may have crept in over time.

As a side note, even though we’d love to show you how to reset your lights, there are just too many different brands and models out there. Each has its own set of settings.

a) Almost always, though, there appears to be a dedicated reset button for you to hit.

b) If not, there is usually a way to do so by holding down the power button for an extended amount of time.

c) If neither of these options works, it may be prudent to look up the manufacturer’s information online to save further guesswork.

By replacing the Controller/LED Strip

We’re afraid to say that you’ve run out of options at this time. In general, if the two solutions above didn’t work, it signifies that either your LED strip or the controller has a flaw.

You can’t get around this because there isn’t a cheap way to do it. The only thing you can do is replace one or both of these parts.

Try using a different controller to control your LED strip to narrow it down. If this does not work, you will undoubtedly need to replace your LED strip. You can find here some great LED strip lights. You can check the controller also here!

How To Fix power drop?

There is a simple way to fix voltage drop, and it’s to lower the brightness gradually. You can run your LEDs at a lower brightness so each can use less power, leaving you with more leftover.

You can also take more steps to get a brighter glow that doesn’t have any color flaws. If you buy a ready-made solution from companies like Philips hue light, they usually figure this out for you.

They automatically cut the strip’s brightness to look good at the start and the end. You can’t connect the strips to make longer strips with this solution. The price per strip would also rise.

If you didn’t get the answer to the question ” How to fix LED lights that are different colors ?” then don’t forget to comment below. We will try to help you in sha Allah!

Please follow and like us:

Leave a Comment